Home Advice Checklist: How to Properly Install Garage Doors

Checklist: How to Properly Install Garage Doors

Checklist: How to Properly Install Garage Doors
Image by Paul Brennan from Pixabay

Can you imagine a modern garage without overhead doors? This has long been a constant among private houses and commercial properties owners. Properly installed garage doors from leading manufacturers guarantee long-term performance.

Despite this, even the most reliable garage doors sometimes fail and require Fix Garage Doors CA services https://fixgaragedoors.ca/ when needed. Both partial and complete replacement of garage work is painstaking work, so we recommend that the professionals such as Fix Garage Doors CA take care of that. This review will learn all about installing garage doors and why this job is suitable for experienced professionals.

Preparing to Install Garage Doors: Where to Start?

The first thing to do is prepare the garage opening for the installation of the structure. Please note that a brick or concrete garage does not need to be additionally reinforced with a frame. But if your garage is built from “light” materials, it is better to install a frame. And remember that if the ceiling height is less than 18 cm and the space on the sides is less than 45 cm, installing the gate is not possible. The height of the ceiling influences the lift of the garage door: standard, high, and low. Here are their features:

  • Standard rise — from 30 to 60 cm;
  • Low rise — from 20-35 cm;
  • High rise — from 60 cm.

Separately, it is worth paying attention to the floor. Check its evenness with a level. For sectional garage doors and especially for steel doors, it is crucial to be perpendicular to the floor and close to it.

Attaching the Frame and Adjusting the Springs of the Mechanisms

Start with the panels; attach the bottom one so that the edges evenly extend beyond the edges. Measure the entire area with a level to avoid distortions in one direction. Start drilling holes for the dowels. You need to fix the racks and then the profiles and fix them securely. Check if the vertical and horizontal guides match.

After that, start attaching the hinges to the side supports and brackets on the bottom panel. Next, insert guides into these panels and adjust and secure the rollers. Then tighten the cable. Make fasteners to the top panel. In the end, you need to make sure that all sections fit snugly together. If there are gaps, they must be covered.

The construction should start smoothly and easily. You need to adjust the gate springs and tighten all the cables to do this. Pay attention to the fasteners — they must be tightly tightened so that the gate does not stagger or shake during operation. Make sure the cable tension is the same and even.

Having settled all the details and mechanisms, check the gate. Their course should be smooth and even without jerks. If so, the gate is installed correctly.

Conclusion

If suddenly you have any doubts or questions about the installation of sectional doors, please contact the experts. The installation team will help to establish and organize the entire installation process. And you will no longer have to worry about anything because the warranty period and service after installation apply to the garage doors.

Featured Image by Paul Brennan from Pixabay